Search:

We will do everything we can to run it, I dont think we can financially run the whole series this year but we will run what we can !

--------- :O) ---------

Mainly to straighten out the difference in diameters , carb is 40mm, intake bore usually around 36/37mm and to eliminate the extra gasket surface when using a spacer plate with the NOS port. It also...

If the head can handle it, lower your lauch to about 3500 rpm and set the static clutch pressure low around 120 pound tatal, add nut/bolt to three arms and launchat 3/4 throttle, if comfy, then hit...

Please use qualifying ladders in both classes Jason. That way no cherrie pickin' in the early rounds....

Cut the steps on the lockup where the springs sit deeper by about .075 so you can shim it lighter.

Yea you can do it , I ran 1500cc 14-1 compression on alky with zoomies, then a year later I added an Eaton M90 supercharger. Less top end but tons of torque. Supercharger added ALOT , period!...

Great article...

http://www.competitionplus.com/drag-racing/editorials/22862-up-front-the-sellout-times-three?fb_comment_id=fbc_474851492538066_5513904_475372165819332#f3a089e1f4

Good stepping stone for those boys you are mentioning is Promod, why dont they race in that class? just wondering. Thats alot more comparable to Prostock than Pro street. They are no doubt great...

No! your RPM should not rise more than 500rpm, what is happening is the rpm are rising ALOT , then the arms are coming in and spinning the tire, its the same way you do a burnout. High rpm then drop...

Its good to be young with quick reflexes..... :o

I want to thank everyone who ran this class this year, Everyone was very friendly and fun to be around, we are having a blast. See everyone in a few weeks.

Are 3rd and 4th paying anything?

yea, he started on a prostreet pw50...... ;O)

No,track was great as always. We blew the motor Thursday testing at our track , www.pro109.com and had to put in Brads (RPM Shop) spare motor, totally different torque curve and I didnt back the...

If Byron is a Genius, why cant he get Chip's Buell to run as fast as the Lucas Buells.......Im not taking ANYTHING away from Byron, him and George are the best out there in the bike world but think...

tuner doesnt know what he is doing.....

I cant believe no one else has been able to run them numbers on Harleys.....

With the bigger cams and carbs , I'm sure you raised your shift points and changed your gearing to accomidate.

Did you dyno it before and after, sound like you lost power with the cams and carbs....

most of the sponsors on this site: Star Racing, Schnitz Racing, FBG, Orient Express and many more can supply them to you.

yup..........

Where can I find the prices for the Manufacturer Cup gate and class fees?

Shift minder and an LED strip light from an auto parts store.

;O)<=====[