Search:

I've got a nice '83 xlx with nice pipes and a 42mm HSR. Runs good but the pushrod tubes leak. I put all new 0-ring in it, but it still leaks. I don't know if the tubes are stock or not. Thanks for...

Ive heard it's done, but I've never seen it. What is involved in mating the KZ/Z1 clutch basket to a J-model motor??

Where is Geno Scali Anyone know

Anyone know how to get hold of Jim Carol Thanks......

I know this subject probably has been covered before, but I can't find it in a search. I'm not happy with the stock forks that are on my small tire chassis. I have a set of KZ-400 forks I'd like to...

Is a switched throttle necessary with the Schnitz PS-II to activate the box

I'm wondering if the Schnitz Pro Series II can be used to control a throttle stop.....

Anyone tell me what is a good source for a 6 X 15 inch wheel I never can find anything about Monoque ()....Thanks

I don't want a remote starter anymore for my KZ dragbike. What is the best way tosolve this problem I don't care about running a alternator/generator. What can be done to remove all that weight on...

My sentiments exactly, I'll never ride one, but as I read the article for the second time, the hair stood up on the back of my neck and I felt a sense of envy; and pride, in having met and talked to...

Thanks everyone.............

I have a box full of gears and shafts, but am not sure what they are. I do know they are all KZ 900/1000/1100. What is a good source for finding out this info I went to www.kawasaki.com , but they...

Can someone explain to me how the A/R is arrived at Thanks....

Anyone tell me how to get hold of Bill Hahn Sr. Thanks..........

Can anyone tell me how to get hold of Todd Athenas Thanks.....

Mike,


Unless you absolutley have to split the wheel, don't. From personel experience, it's not a good thing to put any kind of heat to a aluminum wheel, especially when it is apart. I probably...

Contact Bill Pippard, Pipracer3185@aol.com for the Kaw/Suz clutch conversion....smileys/smiley2.gif

I'm considering a Mikuni HSR for my turbo dragbike. Anyone using a 45 or even the 48 I'm wondering if the 48 would be too big for a 1428 Any ideas

Thanks guys for all the ideas. The plug wires are standard Dyna wires. I had the battery load tested tonight, it was good. Has anyone heard of Dyna coils slowly going bad I had one go bad, but it was...

smileys/smiley5.gif Got my hands on a good old Kaw bracket bike, been sitting for awhile, but good parts. 1425, slider, 9" tire, Digital Delay, Lectrons, Dyna S, DRL-400, Shift counter, shift minder,...

Thanks.............................

Anyone got a phone number for Gary Clark Thanks.smileys/smiley5.gif

Congratulations Steve! Wins for you are long overdue. The Gainsville race was a beautiful thing, Harleys & Buells dropping like flys. Cubic money defeated by hard work and determination. It don't get...

I'm with Marc, it's a perfect fit for more than one reason. The only reason NHRA has anything to do with the "import type" cars is that it is so wildly popular they couldn't ignore them. To align...

Time-serts are good. If you can't find them ask for key-serts or E-Z Loks. You'll probably have to go to a fastener or bearing company.