WHAT ARE MY OPTIONS, INSTALLED BOTTOM CASE ON MOTOR, PULLED APE STUD OUT, STUD IS FINE, THE HOLE IS STRIPPED. WHAT IS THE RIGHT WAY TO FIX, DONT REALLY WANT TO INSTALL ANOTHER SET OF CASES. THANKS
Better yet, use a Time-Sert. Better than a helicoil.
Originally Posted by timkellogg
work great .I even have one in a sparkplug hole. after installed, if used outside of engine oil use antiseze on bolt or sparkplug threads, as they are steel not aluminum
Time-serts are good. If you can't find them ask for key-serts or E-Z Loks. You'll probably have to go to a fastener or bearing company.
Who do you guys recommend for building strong cranks. I see where Gary is now building cranks. I know of GRC, HMP and Falicon. Do they charge about the same for a strong weld and pin job Thinking about a big Nos Kaw motor or maybe turbo.
I know where not to go ! [img]smileys/smiley7.gif[/img]
I would recomend Gary or HMP
Thank you Tim!
Who do you not recommend You can send me a message on that answer if that would be better.
Thank you Jack for youre-mail andinput.
TonyEdited by: Mr Latino
|« Previous Thread | Next Thread »|