Russ collins 400 Cams and Cylinder Head

[nflballer5445]

Hi I have a 1977 Kawasaki KZ1000 LTD. When I got the bike I was told that the cams and the head wereRuss Collins 400 cams and cylinder Head. I was wondering how I could spot or check to make sure that these are the real thing and if someone had information about both parts.(specs) Any information about this would be greatly appreciated thanks.

[APE Jay]

Cams should be .425 lift.

Jay

[mark1135cc]

.423"lift and 261* duration@.050". ihave the same cams.they screem at 6500rpm up.there will be rc400 stamped on the cams.they are similar to WEB's 109 grind.[img]smileys/smiley2.gif[/img]

[joe k]

Hi I have a 1977 Kawasaki KZ1000 LTD. When I got the bike I was told that the cams and the head wereRuss Collins 400 cams and cylinder Head. I was wondering how I could spot or check to make sure that these are the real thing and if someone had information about both parts.(specs) Any information about this would be greatly appreciated thanks.

[img]smileys/smiley1.gif[/img]there you are the 1970's have just jumped into 2007 [img]smileys/smiley2.gif[/img]

[APE Jay]

Funny they called a .429 lift "Pro Stock Special" back then.

I have a brand new set of these if anyone in interested.
JayEdited by: APE Jay

[Kawi1500Vortex2]

how much for the set jay


tank

[APE Jay]

I would take $200 for them.

Jay

[Kawi1500Vortex2]

how big is the base circle

[floored]

They are either 1.100 or 1.110. Mine is at Tommys or I would measure for you.

[Kawi1500Vortex2]

#Edited by: Kawi1500Vortex2