Results 1 to 6 of 6

Thread: Cable Clutch Sprocket Covers

Hybrid View

  1. #1
    Member
    Join Date
    Jun 2006
    Location
    United States
    Posts
    45

    Cable Clutch Sprocket Covers

    On my oil cooled GSXR 1277 setup I use 1999 Bandit 1200 cases with a cable and spring clutch conversion. Does anyone know what model/year bikes I can take sprocket covers/actuators from?
    Thanks
    Happiness is.... a bye to the final.

  2. #2

  3. #3
    Member
    Join Date
    Jun 2006
    Location
    United States
    Posts
    45
    Cool, thanks. What years?

    Will the older 750's work?
    Happiness is.... a bye to the final.

  4. #4
    I think if it came w/a left side top cable it will work.
    There are different length push rods.
    I use 90's Katana 600 and make the push rod.
    If the push rod is too long you can just shorten it.
    I have a piece of 6mm stock and just make the proper length rod.

  5. #5
    Member
    Join Date
    Jun 2006
    Location
    United States
    Posts
    45
    I'm set right now, but a bolt broke part of the sprocket cover so I'd like to replace it. Thrown a chain or 2 so I like to have a spare on hand. Do you ever use any of the 86 and on stuff?
    Happiness is.... a bye to the final.

  6. #6
    Member
    Join Date
    Jan 2010
    Location
    England
    Posts
    59
    Bandit 600 will work, the later MkII has the electronic speedo pick up in it.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •