|
|
where would i put the nozzle do you have a turbo bike
1 Nozzle between the carb and turbo does fine. Yes I have done a few bikes like yours. You can get real serious and put 4 nozzles in each runner to adjust the mixture seperatly, but you wont need to do that yet.
how much shot to start off with what parts would i need to complete this im new to nitrous
you are WAY over carbed, I have a top gas bike set up like yours except its a kawasaki. the 60mm carb is too big. I run a mikuni 42mm, I used to run the super B many years ago but the mikuni is a much better carb all around. your three speed isnt helping, I started with a three speed and when I went to a five speed it really helped. I run an old rajay at 30psi and it can 1.17 the 60ft. you dont need no2, just get what you have set up right and you will be happy.
will it spool faster with the smaller carb I do have a Super B as well
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
