NEED HELP

[JEFFS]

DRAGBIKE224.jpgi was wondering how to disconnect this i bought the bike and have rebuilt it .i cant run it at the track i am going to run at . i want to remove it but dont know if all the other stuff will still work -- air clutch -- auto shift -- rev limiter ect

[Dave A]

Call MPS, that is his specialty

[PM720]

I am pretty sure if you connect the SWITCH and TRANSBRAKE wires together everything will work as now but without any delay.

Scott

[jtodd5781]

I am pretty sure if you connect the SWITCH and TRANSBRAKE wires together everything will work as now but without any delay.

Scott

X2, or you can wire a clutch switch to the transbrake wires if you want to leave with the clutch instead of a push button switch.

[JEFFS]

the ground wire and the hot wires what do you do with them ???

[BIV]

Usually nothing. But you have more than one so you probably have to address where the extra ones go.

[jtodd5781]

Tape them up.

[JEFFS]

thanks everybody for your input i will give it a go next week i should have the motor back in