MPS Racing: Showerhead Nitrous Solenoids

Print Friendly, PDF & Email

MPS Racing

Showerhead Nitrous Solenoids

September Special 10% Off

The MPS Showerhead Solenoids were designed to shorten the solenoid and shower head assembly’s overall length. They are available in both .063” orifice and .093” orifice and use a Teflon plunger seal. The Showerhead Solenoids feature an inlet port, 4 outlet ports, a purge port, and a jet pressure port. The inlet port and the purge port are interchangeable. The jet pressure port is used to monitor the pressure between the jet and the solenoid.

By monitoring the jet pressure you can see the true progression of your nitrous system. All ports are 1/8” NPT. They come with two 1/8” NPT plugs to block any unused ports. Two 8-32 x ½” mounting screws are also included to mount the solenoid. All plugs and mounting screws are loose. Tighten all fittings and mounts before use. We recommend no sealant on the jet pressure port or the four outlet ports. Use Loctite 545 thread sealant on the purge and inlet ports only.

CLICK HERE  FOR MORE INFO

You must order by 9/30/2018 at 11:59 PM and mention Dragbike.com to get the special!

 


Motorcycle Performance Specialties
380 Orange Lane – Casselberry, Florida 32707
Phone: (321) 972-8282 – Fax: (321) 972-5123
Sales E-Mail: sales@mpsracing.com