MPS : Water / Methanol Injection Kit

Print Friendly, PDF & Email

MPS Racing

Water / Methanol Injection Kit

Hayabusa Gen 1 & Gen 2 – GSXR1000

The MPS Water/Methanol Injection kit for the Hayabusa will help keep your nitrous engine together longer. The water/methanol injection will help carry engine damaging heat out of the engine allowing you to make more power reliably. A 50/50 mix of water and methanol is normally used where rules allow or 100% water where rules dictate water only.

The intake bells are custom for the Gen 1 or Gen 2 Hayabusa and GSXR 1000. The nozzles have a very fine mist with an 80 degree full cone spray pattern. They have a .010‰ orifice and flow .63 GPH (Gallons per Hour) at 40 psi and 2.00 GPH at 100 psi. You can use pulse width modulation like a nitrous stage to vary the amount of water as well as pressure. We normally use a nitrous stage to control the water/methanol injection. The kit is made for no air box applications only. Intake bells available in 11 colors.

Introductory Priced at $359.00

You must order by 4/30/2017 at 11:59 PM and mention DRAGBIKE.COM to get this special!

CLICK HERE TO LEARN MORE

Motorcycle Performance Specialties
380 Orange Lane – Casselberry, Florida 32707
Phone: (321) 972-8282 – Fax: (321) 972-5123
Sales E-Mail: sales@mpsracing.com

Write a Comment

Your e-mail address will not be published.
Required fields are marked*

Categories: News / Race Results