|
MPS RACING
MPS Air Throttle Stop
We would like to introduce
the improved MPS Air Throttle Stop. We made it smaller (Just
2" wide at its widest point) by incorporating the adjustment
lock collar directly to the special air cylinder rod. In using
this design we were able to eliminate the extra adjustment rod
completely. The air cylinder screws directly onto the mount
eliminating the set screws being tightened down on the stainless
steel cylinder. This prevents any possibilities of bending the
cylinder and binding the piston inside. We have eliminated the
ball chain as well, removing all possibilities of breakage.
So, be sure you compare the features our new "Stop"
before you buy an imitation of our original Air Throttle Stop.
To celebrate, the new and improved Air Throttle Stop, we offering
the "MPS Heads Up Combo Package." This package incorporates
the MPS Air Throttle Stop (Lectron or Mikuni) and a Dedenbear
Throttle Stop Controller for one low price of $499.00. This
saves you $100.00 off the regular price of this package. The
sale ends 5/18/2003 at Midnight so don't delay. Order your "MPS
Heads Up Combo" P/N 1-0330 today and start winning races!
For those of you who are new to Throttle Stops, they are designed
for slowing down a bike to run a specific index while still
maintaining high MPH. The new MPS Air Throttle/Stop is used
with the Dedenbear Throttle Stop Controller P/N 11-TSC-2. This
is the only NHRA legal throttle stop for a motorcycle and is
available for Lectron carbs P/N 1-009 and Mikuni type carbs
P/N 1-0091. Operation is simple, just set the amount you want
the carb slides to drop during throttle stop operation (adjusts
from 0"-1.5") with the adjustment lock collar. The
Throttle Stop Controller controls when and how long the throttle
stop is activated. After leaving the starting line the carb
slides will drop to the preset point where they will stay until
the timers deactivate it allowing the slides to return to wide
open throttle. Through all this your hand remains at full throttle.
It will not turn your throttle grip! The speed that the slides
open and closed can be adjusted independently of each other
and can be made to open fast or slow. This lets you dial in
an easy roll on or roll off the throttle. Using the throttle
stop right off the starting line can eliminate wheel spin entirely
for the ultimate in consistent 60 footers. The Air Throttle/Stop
comes with a throttle cable, electric air valve, air tee, air
line, and installation instructions.
You will need to mention
the Internet special to get this sale pricing. Go to our web
site at http://www.mpsracing.com/
and click on the secure order form to order yours today. These
purchases will count towards the 2003 contingency purchases,
so register online now! Click on over to the ever growing instruction
area while you are surfing. You will find over 50 sets of product
instructions for MPS, MSD, NOS, Dyna, and Computech products.
And as always, enter the Tether Kill Switch drawing. Dick Hartman
of Thunder Valley Cycles in Fremont, IN was the lucky winner
in April. Congratulations Dick!
|
