|
MPS Fast FI Mixture
Control
 Fast,
quick, easy electronic fuel injection fuel management. That's
what is in the package of every MPS Fast FI Mixture Control.
The original "MPS Mixture Control" sold in 1981 was
the first motorcycle fuel injection aftermarket product. The
second generation Fast FI Mixture Control sets new standards
for fuel management with a dry nitrous system incorporating
the instant rich feature. The Fast FI Mixture Control was designed
to be a universal application and will work on most late model
four cylinder electronic fuel injected motorcycles.
The MPS Fast FI Mixture
Control P/N 1-0337 is a simple means to adjust the fuel curves
on your fuel-injected motorcycle. This allows for tuning after
the installation of aftermarket exhausts, intake modifications,
or internal motor modifications. It can only richen the fuel
mixture. It cannot lean the mixture. The Fast FI Mixture Control
has a low speed pot that adds fuel at low speed much like a
mixture screw on a carburetor. The accelerator pump pot is an
extra enrichment when the unit senses rapid rpm acceleration.
This acts like the traditional accelerator pump on a carburetor.
The high-speed pot controls the high RPM like the main jet of
a carburetor.
The high-speed RPM
set pot determines what RPM the low speed pot is no longer controlling
the mixture and the high-speed pot takes over. The Fast FI Mixture
Control has an instant rich feature to work with Dry Nitrous
Systems. It locks the fuel injection system in a full rich mode
instantly via a signal from the Dry Nitrous System. This means
no more reprogramming for NOS operation. The Fast FI Mixture
Control looks at the fuel injection map the same way the factory
does and adjusts it the same way the factory does. Because our
product is not compatible with other aftermarket products we
recommend removing any other type of non-factory adjustments,
downloads,etc. before installing the Fast FI Mixture Control.
The MPS Fast FI Mixture Control is racer priced at $229.00 and
are in stock for immediate shipment.
Download MPS Fast
FI Mixture Control Instructions Here
in PDF fromat.
MPS
Phone: 407.330.9727
FAX: 407.322.8632
sales@mpsracing.com
www.mpsracing.com
|
