 MR. TURBO MULTI-STAGE
ELECTRONIC BOOST CONTROLLER
The MSBC-1 Multi-Stage Boost Controller has been designed to allow the turbo
charged vehicle owner to achieve the maximum vehicle potential in a controlled and
repeatable manner. It has been designed to be a flexible electronic waste gate control
solution for the performance street, dirt, and drag race markets. The MSBC-1 has the
multi-stage and control flexibility produce repeatable, controlled boost profiles with a
variety of turbo systems and applications in a cost effective and easy to use package.The MSBC-1 can be used in many high performance applications that require
incremental boost control. This might be using the MSBC-1 to provide low, mid, and high
boost stages for your street or dirt vehicle or creating a separate stage for each gear in
a drag race application.
The MSBC-1 has the following features
- Up to nine stage programmable boost control.
- 0-60 psi target boost range for each stage (1 psi increments)
- Five different ramp settings to control how fast boost is
allowed to build.
- Launch stage for drag racing.
- Shift input for automatic stage selection for drag racing.
- Front panel stage selection by driver for street or dirt use.
- Readout of actual boost during boost control.
- Two analog data recorder outputs - Actual boost level. Target
boost level.
- Two solenoid drive outputs - One increase boost output. One
decrease boost output.
- Can be used with single or dual port waste gate.
- Uses electronic pressure sensor in manifold to monitor and
control boost.
- Will force waste gate to produce preset target boost level
even with air density, load, or mechanical variations.
The MSBC-1 is an easy to use, cost effective tool to help you
get the most out of your turbo vehicle.
For
more information, fill out the
reader service card below,
or contact: |
Mr.
Turbo
4014 Hopper Road - Houston, Texas 77093
Phone: (281) 442-7113, Fax: (281) 442-4472
Internet: www.mrturbo.com |
|
