MPS Racing: MaxxECU ECU & Harness Sale

Print Friendly, PDF & Email

MPS Racing

MaxxECU ECU & Harness Sale

All ECU harness combos come with a base map. 

 

Maxx Sport Terminated Harness $1,899.00

The MPS Terminated MaxxECU Sport EFI Harness simplifies the installation of your MaxxECU Sport EFI on Suzuki Hayabusa, Suzuki GSXR1000, Suzuki GS, Kawasaki ZX14, Kawasaki ZX10, and Kawasaki KZ motorcycles. The harness was designed for the ECU to be mounted in the front under the dash or in the rear sub frame. The harness is covered and terminates all the critical (needed to run) components of the EFI system. Using this terminated harness will greatly reduce the chance of problems when installing your MaxxECU EFI system. If you are not comfortable or do not have the tools to crimp all the styles of connectors this harness is for you.





This harness will plug into your crank sensor (customer specified type – GSXR1000, ZX14, ZX10, MPS Hall Effect pick up for GS & KZ), cam sensor (customer specified type – Gen 1 & Gen 2 Hayabusa, GSXR1000), injectors (customer specified type – Gen 1 Hayabusa, Gen 2 Hayabusa, GSXR1000, Bosch EV1, and Bosch EV14 ), Throttle Position Sensor (customer specified type – Gen 1 Hayabusa, Gen 2 Hayabusa, and ZX14), Bosch style igniter (MPS p/n 1-0783), coils (stock or aftermarket stick type), air temperature sensor (customer specified type – Suzuki or MPS), coolant temperature sensor (customer specified type – Suzuki or MPS), Bosch Style O2 Sensor, fuel pressure (MPS p/n 1-0597), and oil pressure (MPS p/n 1-0598). A MAP sensor is not required as the MaxxECU has a built in MAP sensor. A MAP sensor is not used for normally aspirated or nitrous applications. Both fuel pressure and oil pressure are optional sensors and are not needed to run the bike.

There are 5 additional sub harnesses that connect to the main harness: injector harness, coil harness, input harness, output harness, and auxiliary (handlebar controls) harness.

The injector harness connects the main harness to the injectors. It comes with injector connectors to match your (customer specified) injectors. Available connectors are Factory Gen 1 Hayabusa, Gen 2 Hayabusa & GSXR1000, Bosch EV1, Bosch EV6. We are constantly sourcing connectors, so if we don’t list your injectors contact us.

The coil harness connects a bosch style igniter to the factory stick ignition coils. It also has the coil power and the igniter cylinder head ground.

The input harness is a flying lead harness that has a sensor power, sensor ground, digital input #1, digital input #2, analog input #5, analog input #7, analog input #8. The analog inputs are generally used for pressure sensors, distance sensors, temperature sensors, etc. The digital inputs are generally used for on/off events and speed sensors.

The output harness is a flying lead harness that has 12V positive, coil #5, coil #6, output #1, output #2, output #5, output $8, output #11, output # 12. The outputs are generally used for nitrous, boost controllers, shift lights, etc.

The auxiliary (handlebar controls) harness is a flying lead harness that has a 12V positive, ground, analog input #1, analog input #2, analog input #3, and output #3. The analog inputs are generally used for 2 step launch control, shift button, nitrous arm switch. The output is generally used for the shift light.

 

Maxx Race Terminated Harness $2,299.00

The MPS Terminated MaxxECU Race Harness simplifies the installation of your MaxxECU EFI on Suzuki Hayabusa, Suzuki GSXR1000, Suzuki GS, Kawasaki ZX14, Kawasaki ZX10, and Kawasaki KZ motorcycles. The MPS Terminated Harness for MaxxEcu Race was designed for the ECU to be mounted in the front under the dash or in the rear sub frame. The harness is covered and terminates all the critical (needed to run) components of the EFI system. Using this terminated harness will greatly reduce the chance of problems when installing your MaxxECU EFI system. If you are not comfortable or do not have the tools to crimp all the styles of connectors this harness is for you.

This harness will plug into your crank sensor (customer specified type – GSXR1000, ZX14, ZX10, MPS Hall Effect pick up for GS & KZ), cam sensor (customer specified type – Gen 1 & Gen 2 Hayabusa, GSXR1000), injectors (customer specified type – Gen 1 Hayabusa, Gen 2 Hayabusa, GSXR1000, Bosch EV1, and Bosch EV14 ), Throttle Position Sensor (customer specified type – Gen 1 Hayabusa, Gen 2 Hayabusa, and ZX14), Bosch style igniter (MPS p/n 1-0783), coils (stock or aftermarket stick type), air temperature sensor (customer specified type – Suzuki or MPS), coolant temperature sensor (customer specified type – Suzuki or MPS), Bosch Style O2 Sensor, fuel pressure (MPS p/n 1-0597), and oil pressure (MPS p/n 1-0598). A MAP sensor is not required as the MaxxECU has a built in MAP sensor. A MAP sensor is not used for normally aspirated or nitrous applications. Both fuel pressure and oil pressure are optional sensors and are not needed to run the bike.

There are 7 additional sub harnesses that connect to the main harness: injector harness, coil harness, input harness, output harness, auxiliary (handlebar controls) harness, extra harness, and knock sensor harness.

The injector harness connects the main harness to the injectors. It comes with injector connectors to match your (customer specified) injectors. Available connectors are Factory Gen 1 Hayabusa, Gen 2 Hayabusa & GSXR1000, Bosch EV1, Bosch EV6. We are constantly sourcing connectors, so if we don’t list your injectors contact us.

The coil harness connects a bosch style igniter to the factory stick ignition coils. It also has the coil power and the igniter cylinder head ground.

The input harness is a flying lead harness that has a sensor power, sensor ground, digital input #1, digital input #2, analog input #5, analog input #7, analog input #8. The analog inputs are generally used for pressure sensors, distance sensors, temperature sensors, etc. The digital inputs are generally used for on/off events and speed sensors.

The output harness is a flying lead harness that has 12V positive, coil #5, coil #6, output #1, output #2, output #5, output $8, output #11, output # 12. The outputs are generally used for nitrous, boost controllers, shift lights, etc.

The auxiliary (handlebar controls) harness is a flying lead harness that has a 12V Positive, ground, analog input #1, analog input #2, analog input #3, and output #3. The analog inputs are generally used for 2 step launch control, shift button, nitrous arm switch. The output is generally used for the shift light.

The extra harness is a flying lead harness with 2 digital inputs and 6 outputs. These are usually not used.

The knock sensor harness consists of two knock sensor connectors with flying leads to connect your knock sensors.

You must order by 9/30/2019 at 11:59 PM and mention DRAGBIKE.COM to get the special!


Motorcycle Performance Specialties
380 Orange Lane – Casselberry, Florida 32707
Phone: (321) 972-8282 – Fax: (321) 972-5123
Sales E-Mail: sales@mpsracing.com