MPS Showerhead Solenoids – 10% Off
The MPS Showerhead Solenoids were designed to shorten the solenoid and showerhead assembly’s overall length. They are available in both .063 orifice and .093 orifice and use a Teflon plunger seal. The Showerhead Solenoids feature an inlet port, 4 outlet ports, a purge port, and a jet pressure port. The inlet port and the purge port are interchangeable. The jet pressure port is used to monitor the pressure between the jet and the solenoid.
By monitoring the jet pressure you can see the true progression of your nitrous system. All ports are 1/8 NPT. They come with two 1/8 NPT plugs to block any unused ports. Two 8-32 x ½ mounting screws are also included to mount the solenoid. All plugs and mounting screws are loose. Tighten all fittings and mounts before use. We recommend no sealant on the jet pressure port or the four outlet ports. Use Loctite 545 thread sealant on the purge and inlet ports only.
You must order by 10/31/2019 at 11:59 PM and mention DRAGBIKE.COM to get the special!